
Description
Klimair® UNOKLIMA Bathroom Special is specifically configured to provide both regular exhaust and heat recovery for bathrooms. The 100 mm model is suitable for most smaller bathroom and toilet spaces.
The models run continuously in a normal heat recovery cycle to ensure constant fresh air with minimal heat loss. At the same time, humidity control is preset and cannot be interrupted.
If the humidity exceeds the preset value, the unit switches to constant exhaust at speed 3 until the humidity drops below the preset value. The unit then automatically switches back to the heat recovery cycle.
The unit must be electrically connected to the bathroom light switch. When the light is turned on, the unit runs in exhaust mode at speed 3, ensuring only exhaust when there is water activity in the room. When the light is turned off, the unit automatically switches to the heat recovery cycle. The unit operates with constant ventilation with 70 seconds of exhaust, followed by 70 seconds of intake with heat recovery. The unit has 3 speeds controlled by remote control.
It comes with a motor, wall tube, heat exchanger, two filters, interior installation frame, remote control, and exterior wind deflector. The unit can be installed in exterior walls ranging from 250 to 500 mm.
UNOKLIMA 2.0 Bathroom Speciel 100 mm
31040.20- Material: ABS/Ceramic
Diameter: 100mm
Wall thickness: Max 500mm
Filter: G3
IP rating: X4
Airflow (m³/h): 10-20-30
Noise level (dB): 14-35
Power consumption (W): 2.7-4.9
External noise reduction: 35 dB