Description

UNOKLIMA 2.0 WiFi 100 K-app creates a healthy indoor climate with continuous ventilation and heat recovery.

Reduces humidity, radon, viruses and CO₂.

Effective ventilation and minimal heat loss—with the windows closed. Klimair continuous ventilation with heat recovery minimises heat loss. This enables significant energy savings by reducing the heating system’s need to operate at maximum output.

Ideal applications include private homes, holiday homes, offices, classrooms, site cabins, workshops and much more. Can be installed in external walls with a thickness of 250–500 mm. Must not be used in wet rooms.

The unit operates in a continuous cycle of 70 seconds of extraction followed by 70 seconds of air supply. During extraction, heat is absorbed from the stale air. During air supply, this heat is transferred to the incoming fresh air. Heat recovery efficiency of up to 93% is achieved when operating at speed 2. This meets the requirements of BR20.

The WiFi 100 app model is designed to upgrade existing 100 mm air ducts only where it is not possible to install a new 160 mm air duct. Installing a 160 mm air duct always provides the best results.

The WiFi 100 app model has the capacity to ventilate rooms of up to 20 m² when operating at the highest speed.

The WiFi 100 app model comes with a WiFi app solution for selecting and controlling the various functions:

• Up to 16 units of the same model can be linked. In a linked installation, all units are controlled by the first connected unit. The units connect wirelessly via WiFi.
• A 700 mm wall duct is available as an optional extra.

Functions:

• Automatic operation with humidity control
• Monitoring mode with on/off operation and humidity control
• Manual speed control
• Humidity control setting
• Manual operation: continuous ventilation with heat recovery at the selected speed
• Night mode: continuous ventilation with heat recovery at low speed and a low noise level
• Boost timer setting: extraction at the highest speed for 20 minutes
• Air supply only, with selectable speed
• Extraction only, with selectable speed
• Filter alarm and reset: indicates when maintenance is due and restarts the unit after an operational shutdown
• MASTER-SLAVE airflow direction: only for multiple linked units, with selectable speed
• SLAVE-MASTER airflow direction: only for multiple linked units, with selectable speed