Description

All UNOKLIMA XT-U models are easy to install and very easy to maintain. A hole in the external wall and two wires, and you are almost done.

UNOKLIMA XT-U 160 models are recommended for all types of living spaces, including bedrooms, wherever it is possible to install a 160 mm model.

UNOKLIMA XT-U BASE 160 provides effective, continuous ventilation with heat recovery.

Reduces humidity, radon, viruses and CO₂.

Effective ventilation with minimal heat loss and the windows closed—even while you are asleep or away from home. Open windows and conventional extraction result in substantial heat loss and increase the demand on the building’s heating system.

UNOKLIMA continuous ventilation with heat recovery minimises heat loss. This enables significant energy savings by preventing the heating system from having to operate at maximum output, as it would when ventilating by opening windows.

Ideal applications include private homes, holiday homes, offices, classrooms, site cabins, workshops and much more. Can be installed in external walls with a thickness of 250–500 mm. A 700 mm air duct is available as an optional extra. The XT-U series is not suitable for use in wet rooms.

The unit operates in a continuous cycle of 70 seconds of extraction followed by 70 seconds of air supply. During extraction, heat is absorbed from the stale air. During air supply, this heat is transferred to the incoming fresh air.

UNOKLIMA XT-U 160 has a heat exchanger that is 50% larger than those in other UNOKLIMA models. This larger heat exchanger provides greater heat storage capacity. Under typical indoor and outdoor temperature conditions, average heat recovery of up to 77–80% is achieved when operating at speed 2.

The units have been tested in accordance with European standard EN1254:2014, which is used for comparison with other products. This EN test shows a maximum heat recovery efficiency of 93%, which is used for product comparisons.

The XT-U 160 model has the capacity to ventilate rooms of up to 40 m² when operating at the highest speed. Continuous operation at lower speeds produces less noise but also reduces ventilation capacity. Multiple units should be installed in larger rooms. When installing multiple units in the same room, there must be a minimum distance of 3 metres between them.

The XT-U 160 BASE model is supplied with a standard remote control for selecting between 3 speeds and stopping/starting the fan. The unit is switched on and off via the external power supply. The internal panel opens or closes after 40 seconds, depending on whether the unit is switched on or off. The remote control has a stop/start button that stops or starts the fan without closing the front cover.